Remember The Password; Table 52: Modes Of Security - Kontron CP3005-SA User Manual

Function
If there is already a password installed, the system asks for this first. To clear a password,
simply enter nothing and acknowledge by pressing <RETURN>. To set a password, enter it
twice and acknowledge by pressing <RETURN>.

Table 52: Modes of Security

Setting
No password is set
Only Administrator
password is set
Only User password is
set
Both User and
Administrator
passwords are set

13.2.5. Remember the Password

It is highly recommended to keep a record of all passwords in a safe place. Forgotten passwords may lead to being
completely locked out of the system.
If the system cannot be booted because neither the User Password nor the Administrator Password are known, refer
to the section 3.1, for information about clearing the uEFI BIOS settings, or contact Kontron for further assistance.
The HDD User Password cannot be cleared using the above method.
www.kontron.com
Description
enter it twice and acknowledge by pressing Return.
Description
Booting the system as well as entering the Setup is unsecured.
Booting the system is unsecured. For entering the Setup, the
Administrator password is required.
The password is required for booting the system as well as for
entering the Setup menu. On every startup, the user will be asked
for the password.
Either the User or the Administrator password is required for
booting the system as well as for entering the Setup menu. If the
User password is entered here, limited access to the Setup is
granted. Entering the Administrator password provides full access
to all Setup entries.
CP3005-SA – Rev. 0.6 Preliminary
// 93