Table of Contents
Advertisement
8/ MMEXT-XMC02 Extension Module
8.1. Overview
The MMEXT-XMC02 is a factory-installed mezzanine extension module which along with an 8HP front panel provides
additional interfaces, such as:
One onboard XMC connector for connecting one x8, x4, or x1 PCI Express 2.0 XMC module over Highspeed
Extension
One onboard M.2 card socket (Socket 3, SATA-based, Key: M, Add-In-Card type: 2280)
One Reset switch
One SATA activity LED
XMC modules providing support for one x8 PCI Express 2.0 interface with up to 5.0 GT/s,
compliant with the ANSI/VITA 42.0 and ANSI/VITA 42.3 specifications, and with a power
consumption of up to 15 W can be used on the MMEXT-XMC02 module.
8.2. Technical Specifications
Table 36: MMEXT-XMC02 Module Specifications
Onboard Interfaces
LEDs/Switches
General
www.kontron.com
Features
XMC
M.2
Board-to-Board
HDD LED
Front Panel Switch
Power Consumption
Temperature Range
Climatic Humidity
Dimensions
Board Weight
Specifications
XMC interface for support of one x8, x4, or x1 PCI
Express 2.0 XMC module via a standard XMC
connector, J1
One M.2 (Socket 3, SATA-based, Key: M) for 2280
SSD Add-In-Cards
Two board-to-board connectors:
One 60-pin, high-speed PCI Express extension
connector, J5
One 120-pin, high-speed I/O extension
connector, J6
One LED (green) monitors SATA HDD/SSD activity
Reset button, guarded
Power consumption without hard disk, CFast card
and peripheral devices connected:
50 mA at 3.3 V
50 mA at 5 V
Operational:
0°C to +60°C, standard
Storage:
-40°C to +85°C, without battery
93% RH at 40°C, non-condensing (acc. to IEC
60068-2-78)
MMEXT05-CMC02: 100 mm x 160 mm CP3005-SA
with MMEXT05-CMC02: 3U, 8HP CompactPCI-
compliant form factor
8HP CP3005-SA with MMEXT05-CMC02: 434
grams (with heat sink, front panel, and two 2 GB
SODIMM memory modules, but without CFast
card)
CP3005-SA – Rev. 0.6 Preliminary
// 55
Advertisement
Table of Contents
