CP3002-RC/CP3002-RA
A.
SATA Flash Module
The CP3002-RC/CP3002-RA provides an optional SATA Flash module with up to 32 GB NAND
Flash memory. The SATA Flash module is connected to the CP3002-RC/CP3002-RA via the
board-to-board connectors J3 located on the CP3002-RC/CP3002-RA and J1 located on the
SATA Flash module. The SATA Flash module has been optimized for embedded systems pro-
viding high performance, reliability and security.
Note ...
Write protection is available for this module. Please contact Kontron for further
assistance if write protection is required.
A.1
Technical Specifications
Table A-1: SATA Flash Module Specifications
SATA FLASH MODULE
Board-to-Board Connector
Memory
Power Consumption
Temperature Range
Climatic Humidity
Dimensions
Board Weight
ID 1039-3625, Rev. 1.0
SPECIFICATIONS
One 34-pin, male, board-to-board connector, J1
Up to 32 GB SLC-based NAND Flash memory
Built-in full hard disk emulation
•
Up to 100 MB/s read rate
•
Up to 90 MB/s write rate
•
typ. 0.5 W
3.3 V supply
Operational:
0°C to +60°C
-40°C to +85°C
Storage:
-40°C to +85°C
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
70 mm x 28 mm
ca. 14 grams
SATA Flash Module
Standard
Extended
Page A - 3