Table of Contents
Advertisement
13.2.7. Save & Exit Setup Menu
The Save & Exit Setup menu provides functions for handling changes made to the uEFI BIOS settings and the exiting of
the Setup program.
The Setup will ask for confirmation prior to executing the commands.
Figure 39: Save & Exit Setup
Table 54: Save & Exit Setup Menu Sub-Screens and Functions
Sub-Screen
Save & Exit
Save Options
www.kontron.com
Function
Description
Save Changes and
Equal to F4. Saves all changes made within the Setup to
Exit
flash, then exits the uEFI BIOS Setup, and finally resets the
system automatically. This function continues the boot
process as long as no option was altered that requires a
reboot.
Discard Changes
Discards all changes made within the Setup, then exits the
and Exit
uEFI BIOS Setup. This function continues the boot process.
Save Changes and
Saves all changes made within the Setup to flash and
Reset
resets the system.
Discard Changes
Discards all changes made within the Setup and resets the
and Reset
system.
Save Changes
Saves all changes made within the Setup to flash but does
not reset system. This function returns to Setup.
Discard Changes
Discards all changes made within the Setup but does not
reset system. This function returns to Setup.
Restore Defaults
Equal to F3. Restores/Loads the factory default values for
all setup options.
Save as User
Saves all current settings as user default. The current
Defaults
setup state can later be restored using Restore User
Defaults.
Restore User
Restores all tokens to settings previously stored by Save
Defaults
as User Defaults.
CP3005-SA – Rev. 0.6 Preliminary
// 95
Advertisement
Table of Contents
