EAS30338
CHECKING THE RELIEF VALVE
1. Check:
• Relief valve body "1"
• Relief valve "2"
• Spring "3"
• Damage/wear Replace the defective
part(s).
EAS30339
CHECKING THE OIL DELIVERY PIPES
The following procedure applies to all of the oil
delivery pipes.
1. Check:
• Oil delivery pipe 1 "1"
• Oil delivery pipe 2 "2"
• Oil pipe 1 "3"
Damage Replace.
Obstruction Wash and blow out with com-
pressed air.
2
1
3
5-48
EAS30340
CHECKING THE OIL STRAINER
1. Check:
• Oil strainer "1"
Damage Replace.
Contaminants Clean with solvent.
EAS30342
ASSEMBLING THE OIL PUMP
1. Lubricate:
• Inner rotor
• Outer rotor
• Oil pump shaft
(with the recommended lubricant)
Recommended lubricant
Engine oil
2. Install:
• Oil pump driven sprocket "1"
• Pin "2"
• Inner rotor "3"
• Outer rotor "4"
• Oil pump cover "5"
• Oil pump housing bolt
Oil pump housing bolt
10 N·m (1.0 kgf·m, 7.2 lb·ft)
TIP
When installing the inner rotor, align the pin "2"
in the oil pump shaft with the groove in the inner
rotor "3".
2
5
3
4
OIL PUMP
1
1