Yamaha MTN1000 2016 Service Manual page 550

Fault code No.
Item
B-10 Delete the fault code and check
that the engine trouble warning
light goes off.
Fault code No. P0564
Fault code No.
Item
Fail-safe system
Diagnostic code No.
Tool display
Procedure
Probable cause of malfunc-
Item
tion and check
A-1 Locate the malfunction.
A-2 Connection of left handlebar
switch coupler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
P056C
A Front brake light switch: open or short circuit is detected.
B Rear brake light switch: open or short circuit is detected.
Confirm that the fault code has
a condition of "Recovered"
using the Yamaha diagnostic
tool, and then delete the fault
code.
P0564
Cruise control setting switch "RES+": open or short circuit is
A
detected.
B Cruise control setting switch "SET–": open or short circuit is
detected.
Able to start engine
Able to drive vehicle
80, 81
"ON" (when the switch is pushed)
"OFF" (when the switch is released)
Push and release the "RES+" side of the cruise control setting switch.
Maintenance job
Execute the diagnostic mode.
(Code 80)
When the cruise control setting
switch "RES+" is pushed: "ON"
When the cruise control setting
switch is released: "OFF"
Execute the diagnostic mode.
(Code 81)
When the cruise control setting
switch "SET–" is pushed: "ON"
When the cruise control setting
switch is released: "OFF"
Improperly connected  Con-
nect the coupler securely or
replace the wire harness.
8-133
CRUISE CONTROL SYSTEM
Confirmation of service com-
Malfunction  Go to item A-2.
Malfunction  Go to item B-2
for the cruise control setting
switch "SET–".
Turn the main switch to "ON".
Push and release the "RES+"
side of the cruise control setting
switch, and then check the con-
dition of the fault code using the
malfunction mode of the
Yamaha diagnostic tool.
Condition is "Recovered"  Go
to item A-9 and finish the ser-
vice.
Condition is "Detected"  Go to
item A-3.
pletion