Yamaha MTN1000 2016 Service Manual page 19

TIP
• If the cruise control system turned off because a malfunction was detected by the FI self-diagnosis,
the cruise control power switch " " must be pushed once before the system can return to the normal
operating condition.
• If a switch for the cruise control system is malfunctioning (fault code No. P056C and P0564), the en-
gine trouble warning light will not come on because the normal operation of the vehicle is not affected.
Meter displays during cruise control system operation
A
F
B
c
D
A. Cruise control system is activated (cruising
speed is set)
B. Cruise control system is turned off (engine
trouble warning light "
control system is deactivated, and cruise
control system indicator light "
C. Cruise control system is turned off (engine
trouble warning light "
control system is deactivated, and cruise
control system indicator light "
D. Cruise control system is turned off
E. Cruise control system is turned on (cruising
speed is not set)
F. Malfunction detected by FI self-diagnosis
G. Malfunction not detected by FI self-diagnosis
a
b
" comes on, cruise
" flashes)
" goes off, cruise
" flashes)
E
e
G
C
d
D
d
a. Malfunction occurs
b. Cruise control power switch "
c. Cruise control power switch "
d. After the cause of the malfunction has been
repaired, delete the fault code by using the
Yamaha diagnostic tool.
e. Cruising speed is set
1-10
FEATURES
b
" "OFF"
" "ON"
c