Yamaha MTN1000 2016 Service Manual page 119

1. Fuel tank
2. Clip
3. Fuel tank drain hose
4. Fuel hose
5. Canister
6. Fuel tank breather hose
7. Canister holder
8. Clamp
9. Canister purge hose
A. The clip may be faced in any direction. Make
sure that the clip does not go on top of the
stopper.
B. Connector color: Gray
C. Install the fuel tank breather hose with its
white paint mark facing forward.
D. Install the canister with its stamped mark fac-
ing upward.
E. 2 mm (0.08 in) or less.
F. Install the fuel tank breather hose with its
white paint mark facing upward.
G. Install the fuel tank breather hose to the port
of the fuel tank. Insert the hose until the end
of the R section of the canister.
H. Install the clamp with its end pointing forward.
Make sure that the clip does not go on top of
the stopper.
I. Install the canister purge hose to the purge
port (throttle body). Insert the hose until the
end of the R section of the canister.
J. Install the clip with its end pointing downward.
Make sure that the clip does not go on top of
the stopper.
K. To throttle bodies
2-74
CABLE ROUTING