Yamaha MTN1000 2016 Service Manual page 115

1. Brake hose (hydraulic unit to front brake cali-
pers)
2. Brake hose (front brake master cylinder to
hydraulic unit)
3. Hydraulic unit brake pipe (rear brake master
cylinder to hydraulic unit)
4. Hydraulic unit brake pipe (hydraulic unit to
rear brake caliper)
5. Hydraulic unit bracket
6. Hydraulic unit
A. Fully insert the ABS ECU coupler all the way
to the rear.
B. Install the brake pipe onto the hydraulic unit,
making sure that the projection on the brake
pipe contacts the hydraulic unit brake pipe
(rear brake master cylinder to hydraulic unit).
C. Install the brake pipe onto the hydraulic unit,
making sure that the projection on the brake
pipe contacts the brake hose (front brake
master cylinder to hydraulic unit).
D. Install the brake hose onto the hydraulic unit,
making sure that the projection on the brake
hose contacts the brake hose (hydraulic unit
to front brake calipers).
E. Install the brake hose onto the hydraulic unit,
making sure that the metal fitting of the
hydraulic unit contacts the brake hose (front
brake master cylinder to hydraulic unit)
2-70
CABLE ROUTING