Yamaha MTN1000 2016 Service Manual page 293

Removing the camshafts
10 N ・ m (1.0 kgf ・ m, 7.2 lb ・ ft)
1
LT
2
Order
Crankshaft end cover/Timing mark accessing
bolt
1 Timing chain tensioner
2 Timing chain tensioner gasket
3 Camshaft cap 1
4 Camshaft cap 2
5 Intake camshaft
6 Exhaust camshaft
Job/Parts to remove
4
5
6
Q'ty
Refer to "GENERATOR" on page 5-34.
1
1
• If the camshaft cap bolt is a new one, it is
not necessary to apply engine oil onto the
4 mating surface and threads of the bolt.
• If the camshaft cap bolt is a new one,
tighten it to 10 N·m (1.0 kgf·m, 7.2 lb·ft).
• If the camshaft cap bolt is a new one, it is
not necessary to apply engine oil onto the
1 mating surface and threads of the bolt.
• If the camshaft cap bolt is a new one,
tighten it to 10 N·m (1.0 kgf·m, 7.2 lb·ft).
1
1
5-10
CAMSHAFTS
8 N ・ m (0.8 kgf ・ m, 5.8 lb ・ ft)
8 N ・ m (0.8 kgf ・ m, 5.8 lb ・ ft)
E
(4)
E
3
M
M
Remarks
(4)
(4)
(4)
(4)
3
F W F W
D D