Crankcase - Yamaha MTN1000 2016 Service Manual

EAS20059

CRANKCASE

Removing the crankcase breather cover and switches
F W F W
D D
17 N ・ m (1.7 kgf ・ m, 12 lb ・ ft)
70 N ・ m (7.0 kgf ・ m, 51 lb ・ ft)
4
1.8 N ・ m (0.18 kgf ・ m, 1.3 lb ・ ft)
13 N ・ m (1.3 kgf ・ m, 9.4 lb ・ ft)
Order
Engine
Cylinder head cover/Intake camshaft/Exhaust
camshaft
Cylinder head
Generator rotor
Starter motor
Water pump
Clutch housing assembly
Oil strainer/Oil pump/Relief valve assembly
1 Gear position sensor
2 Oil pressure switch
3 Oil pressure switch joint
4 Oil filter cartridge
5 Oil filter cartridge union bolt
6 Crankcase breather cover
12 N ・ m (1.2 kgf ・ m, 8.7 lb ・ ft)
E
5
3
2
10 N ・ m (1.0 kgf ・ m, 7.2 lb ・ ft)
Job/Parts to remove
(8)
6
1
LT
4.0 N ・ m (0.40 kgf ・ m, 2.9 lb ・ ft)
Q'ty
Refer to "ENGINE REMOVAL" on page 5-3.
Refer to "CAMSHAFTS" on page 5-9.
Refer to "CYLINDER HEAD" on page 5-23.
Refer to "GENERATOR" on page 5-34.
Refer to "ELECTRIC STARTER" on page
5-40.
Refer to "WATER PUMP" on page 6-9.
Refer to "CLUTCH" on page 5-51.
Refer to "OIL PUMP" on page 5-44.
1
1
1
1
1
1
5-62
CRANKCASE
LT
17 N ・ m (1.7 kgf ・ m, 12 lb ・ ft)
10 N ・ m (1.0 kgf ・ m, 7.2 lb ・ ft)
Remarks