Yamaha MTN1000 2016 Service Manual page 503

Fault code No.
Item
C-1 Locate the malfunction.
C-2 Clutch lever adjustment.
C-3 Connection of clutch switch cou-
pler.
Check the locking condition of
the coupler.
Disconnect the coupler and
check the pins (bent or broken
terminals and locking condition
of the pins).
P0500, P1500
Rear wheel sensor: no normal signals are received from the
A
rear wheel sensor.
B Neutral switch: open or short circuit is detected.
C Clutch switch: open or short circuit is detected.
(Fault code No. P0500 or P0500
and P1500 detected.)
Execute the diagnostic mode.
(Code No. 07)
Rotate the rear wheel by hand
and check that the indicated
value increases.
(Fault code No. P1500
detected.)
Execute the diagnostic mode.
(Code No. 21)
When the transmission is in
neutral: "ON"
When the transmission is in
gear with the clutch lever
released: "OFF"
When the transmission is in
gear with the clutch lever
squeezed and the sidestand
retracted: "ON"
Refer to "ADJUSTING THE
CLUTCH LEVER FREE PLAY"
on page 3-13.
Improperly connected  Con-
nect the coupler securely or
replace the wire harness.
8-86
FUEL INJECTION SYSTEM
Value does not increase  Go
to item A-2 for the rear wheel
sensor.
Incorrect indication  Go to
item B-2 for the neutral switch.
Incorrect indication  Go to
item C-2.
Execute the diagnostic mode.
(Code No. 21)
When the clutch lever is
released with the transmission
in gear and when the sidestand
is retracted: "OFF"
When the clutch lever is
squeezed with the transmission
in gear and when the sidestand
is retracted: "ON"
Correct indication Go to item
C-8.
Incorrect indication  Go to
item C-3.
Execute the diagnostic mode.
(Code No. 21)
When the clutch lever is
released with the transmission
in gear and when the sidestand
is retracted: "OFF"
When the clutch lever is
squeezed with the transmission
in gear and when the sidestand
is retracted: "ON"
Correct indication Go to item
C-8.
Incorrect indication  Go to
item C-4.