Multi-Function Display - Yamaha MTN1000 2016 Service Manual

EAS30618

MULTI-FUNCTION DISPLAY

Multi-function meter unit
1 2
1. "CLOCK" button
2. "RESET" button
1 2 3
10 9
1. Transmission gear display
2. Clock
3. Tachometer
4. Coolant temperature display/air temperature
display
5. Speedometer
6. Fuel meter
7. Eco indicator "ECO"
8. Drive mode display
9. TCS display
10.Multi-function display
EWA12423
WARNING
Be sure to stop the vehicle before making
any setting changes to the multi-function
meter unit. Changing settings while riding
can distract the operator and increase the
risk of an accident.
The multi-function meter unit is equipped with
the following:
• a speedometer
• a tachometer
• a clock
• a fuel meter
• a coolant temperature display/air temperature
display
4 5 6
8 7
• an eco indicator
• a transmission gear display
• a drive mode display
• a TCS display
• a multi-function display
TIP
• Except when switching to the brightness con-
trol mode, turn the key to "ON" before using the
"CLOCK" and "RESET" buttons to adjust the
multi-function meter.
• QS requires an accessory part and cannot be
selected.
• For the UK: To switch the speedometer and
multi-function displays between kilometers and
miles, push both the "CLOCK" button and "RE-
SET" button at the same time.
Speedometer
1. Speedometer
The speedometer shows the vehicle's traveling
speed.
Tachometer
1. Tachometer
2. Tachometer red zone
The tachometer allows the rider to monitor the
engine speed and keep it within the ideal power
range.
When the key is turned to "ON", the tachometer
will sweep across the r/min range and then re-
turn to zero r/min in order to test the electrical cir-
cuit.
1-14
FEATURES
1
1 2