9. Check the start/engine stop switch.
Refer to "CHECKING THE
SWITCHES" on page 8-191.
OK
10.Check the neutral switch.
Refer to "CHECKING THE
SWITCHES" on page 8-191.
OK
11.Check the sidestand switch.
Refer to "CHECKING THE
SWITCHES" on page 8-191.
OK
12.Check the relay unit (diode).
Refer to "CHECKING THE RELAY
UNIT (DIODE)" on page 8-199.
OK
13.Check the lean angle sensor.
Refer to "CHECKING THE LEAN
ANGLE SENSOR" on page 8-201.
OK
14.Check the entire ignition system's
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 8-1.
OK
Replace the ECU.
Refer to "REPLACING THE ECU
(Engine Control Unit)" on page 8-194.
Replace the right handlebar switch.
NG
Replace the neutral switch.
NG
Replace the sidestand switch.
NG
Replace the relay unit.
NG
Replace the lean angle sensor.
NG
Properly connect or repair the ignition sys-
tem's wiring.
NG
8-5
IGNITION SYSTEM