Yamaha MTN1000 2016 Service Manual page 189

EAS31104
REMOVING THE FUEL TANK COVER
The following procedure applies to both of the
fuel tank covers.
1. Remove:
• Rider seat
• Air scoop
• Air scoop stay
Refer to "GENERAL CHASSIS (1)" on page
4-1.
2. Remove:
• Quick fastener "1"
• Fuel tank cover "2"
2
1
3. Remove:
• Fuel tank cover bolt
• Fuel tank cover screw
• Collar
• Fuel tank cover "1"
TIP
Pull the fuel tank cover off at the areas "a"
shown.
EAS31105
INSTALLING THE FUEL TANK COVER
The following procedure applies to both of the
fuel tank covers.
1. Install:
• Fuel tank cover "1"
• Collar
• Fuel tank cover screw
• Fuel tank cover bolt
TIP
• Install the projection "a" on the fuel tank cover
into the grommet "b".
• Install the parts "c" on the fuel tank cover into
the hole "d".
c
a
2. Install:
• Fuel tank cover "1"
• Quick fastener "2"
a
3. Install:
• Air scoop stay
1
• Air scoop
• Rider seat
EAS32041
REMOVING THE FUEL TANK COVER RIVET
The following procedure applies to both of fuel
tank cover rivets.
1. Remove:
• Rider seat
• Air scoop/Air scoop stay
2. Remove:
• Fuel tank cover "1"
3. Remove:
• Rivet "2"
4-18
GENERAL CHASSIS (2)
Fuel tank cover screw
3.8 N·m (0.38 kgf·m, 2.8 lb·ft)
Fuel tank cover bolt
0.4 N·m (0.04 kgf·m, 0.29 lb·ft)
1
1
2
Refer to "GENERAL CHASSIS (1)" on page
4-1.
Refer to "GENERAL CHASSIS (1)" on page
4-1.
d
b