Yamaha MTN1000 2016 Service Manual page 387

2. Install:
• Radiator inlet hose
• Hose clamp (Clic-R)
Refer to "INSTALLING THE RADIATOR" on
page 6-3.
TIP
For more information about installing the hose,
refer to "CABLE ROUTING" on page 2-39.
3. Fill:
• Cooling system
(with the specified amount of the recom-
mended coolant)
Refer to "CHANGING THE COOLANT" on
page 3-29.
4. Check:
• Cooling system
Leaks  Repair or replace any faulty part.
Refer to "INSTALLING THE RADIATOR" on
page 6-3.
5. Measure:
• Radiator cap valve opening pressure
Below the specified pressure  Replace the
radiator cap.
Refer to "CHECKING THE RADIATOR" on
page 6-2.
New
6-8
THERMOSTAT