Yamaha MTN1000 2016 Service Manual page 14

EWA17451
WARNING
• Improper use of the cruise control system may result in loss of control, which could lead to an
accident. Do not activate the cruise control system in heavy traffic, poor weather conditions,
or among winding, slippery, hilly, rough or gravel roads.
• When traveling uphill or downhill, the cruise control system may not be able to maintain the
set cruising speed.
• To prevent accidentally activating the cruise control system, turn it off when not in use. Make
sure that the cruise control system indicator light is off.
Activating and setting the cruise control system
1. Push the cruise control power switch " " located on the left handlebar. The cruise control system
indicator light " " will come on.
2. Push the "SET–" side of the cruise control setting switch to activate the cruise control system. Your
current traveling speed will become the set cruising speed. The cruise control setting indicator light
"SET" will come on.
TIP
The cruise control system operates only when riding in 4th, 5th or 6th gear at speeds between about
50 km/h (31 mi/h) and 180 km/h (112 mi/h).
1. Cruise control setting switch "RES+/SET–"
2. Cruise control system indicator light "
Operating range of cruise control system
1
2
A
3
4
5
6
0
A. Gear position
B. Cruising speed cannot be set
C. Cruising speed can be set
1
"
B
50
(31)
3. Cruise control setting indicator light "SET"
C
1-5
FEATURES
3 2
180 km/h
(112) mph