1. Throttle cable
2. Clutch cable
3. Clamp
4. Horn lead
5. Front brake hose
6. Horn bracket
A. Install the clamp of the horn lead to the horn
bracket.
B. Fasten the front brake hose and horn lead
with the clamp. Align the upper end of the
clamp with the upper end of the horn lead
positioning tape (gray) and the white paint
mark on the brake hose. Route the horn lead
to the inside of the brake hose and fasten it
with the clamp.
C. Pass the clutch cable through the clamp.
D. Fasten the brake hose and throttle cables
with the clamp. Position the clamp on the
caulked section of the brake hose. Face the
opening of the clamp forward.
E. The position of the horn lead may shift within
the range shown in the illustration.
F. Install the horn lead as shown in the illustra-
tion.
2-40
CABLE ROUTING