Yamaha MTN1000 2016 Service Manual page 301

1
1
3 1
EAS31715
INSTALLING THE TIMING CHAIN COVER
1. Install:
• Timing chain cover
• Oil pipe 3
▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼▼
a. Install new O-rings to the oil pipe.
TIP
Apply lithium-soap-based grease evenly on new
O-rings.
b. Install the oil pipe "1" to the timing chain cover
"2".
TIP
• While turning the oil pipe, install it to the timing
chain cover so that the grease applied to the O-
rings is distributed.
• If the oil pipe is not turned smoothly, the O-
rings might be caught.
2
a 1
2 1 3
2 1 3
2
c. Install the oil pipe bolt "3" and tighten it tem-
porarily until there is no clearance at "a" (tim-
ing chain cover to oil pipe) and "b" (oil pipe to
oil pipe bolt).
TIP
Apply locking agent (LOCTITE®) onto the oil
pipe bolt.
d. Install the timing chain cover assembly and a
new timing chain cover gasket.
e. Install the timing chain cover bolts and tighten
them.
Timing chain cover bolt
12 N·m (1.2 kgf·m, 8.7 lb·ft)
f. Install the oil pipe bolts "4" and tighten them
temporarily.
TIP
Apply locking agent (LOCTITE®) onto the oil
pipe bolts.
g. Tighten the oil pipe bolts to the specified
5-18
CAMSHAFTS
1
a
b
3
4