Yamaha MTN1000 2016 Service Manual page 26

Multi-function display
1. Multi-function display
The multi-function display is equipped with the
following:
• an odometer (which shows the total distance
traveled.)
• two tripmeters (which show the distance trav-
eled since they were last reset)
• a fuel reserve tripmeter (which shows the dis-
tance traveled since the last segment of the
fuel meter started flashing)
• an instantaneous fuel consumption display
• an average fuel consumption display
• a display brightness and shift timing indicator
light control display
TIP
• The odometer will lock at 999999.
• The tripmeters reset and continue counting af-
ter 9999.9 is reached.
1
1. Select switch "SELECT"
Push the select switch "SELECT" to switch the
display between the odometer mode "ODO",
tripmeter modes "TRIP 1" and "TRIP 2", instan-
taneous fuel consumption mode "km/L" or
"L/100 km", average fuel consumption mode
"AVE – –.– km/L" or "AVE – –.– L/100 km" in the
following order:
1
ODO  TRIP 1  TRIP 2  km/L or L/100 km
 AVE – –.– km/L or AVE – –.– L/100 km 
ODO
For the UK:
Push the select switch "SELECT" for one sec-
ond to switch the display between the odometer
mode "ODO", tripmeter modes "TRIP 1" and
"TRIP 2", instantaneous fuel consumption mode
"km/L", "L/100 km" or "MPG", average fuel con-
sumption mode "AVE – –.– km/L", "AVE – –.–
L/100 km" or "AVE – –.– MPG" in the following
order:
ODO  TRIP 1  TRIP 2  km/L, L/100 km or
MPG  AVE – –.– km/L, AVE – –.– L/100 km or
AVE – –.– MPG  ODO
TIP
The fuel reserve tripmeter comes on automati-
cally.
If the last segment of the fuel meter starts flash-
ing, the display automatically changes to the fuel
reserve tripmeter mode "TRIP F" and starts
counting the distance traveled from that point. In
this case, push the "SELECT" switch to switch
the display in the following order:
TRIP F  km/L or L/100 km  AVE – –.– km/L
or AVE – –.– L/100 km  ODO  TRIP 1 
TRIP 2  TRIP F
For the UK:
TRIP F  km/L, L/100 km or MPG  AVE – –.–
km/L, AVE – –.– L/100 km or AVE – –.– MPG 
ODO  TRIP 1  TRIP 2  TRIP F
TIP
• To reset a tripmeter, select it by pushing the
"SELECT" switch, and then push the "RESET"
button for two seconds.
• If you do not reset the fuel reserve tripmeter
manually, it resets automatically and disap-
pears after refueling and traveling 5 km (3 mi).
1-17
FEATURES