Yamaha MTN1000 2016 Service Manual page 267

EAS31653
DISASSEMBLING THE REAR SHOCK
ABSORBER ASSEMBLY
1. Remove:
• Oil seal
• Bearing "1"
TIP
Remove the bearing with a socket "2" that
matches its outside diameter.
2
1
EAS30220
CHECKING THE REAR SHOCK ABSORBER
ASSEMBLY
1. Check:
• Rear shock absorber rod
Bends/damage  Replace the rear shock
absorber assembly.
• Rear shock absorber assembly
Gas leaks/oil leaks  Replace the rear shock
absorber assembly.
• Spring
• Bearing
• Collars
Damage/wear  Replace.
• Bolts
Bends/damage/wear  Replace.
EAS30221
CHECKING THE CONNECTING ARM AND
RELAY ARM
1. Check:
• Connecting arms "1"
• Relay arm "2"
Damage/wear  Replace.
REAR SHOCK ABSORBER ASSEMBLY
1
2
2. Check:
• Bearings
• Oil seals
Damage/pitting  Replace.
3. Check:
• Collars
Damage/scratches  Replace.
EAS31654
ASSEMBLING THE REAR SHOCK
ABSORBER ASSEMBLY
1. Install:
• Bearing "1"
• Oil seal
New
TIP
Install the bearing with a socket "2" that matches
its outside diameter.
Installed depth "a"
4.0 mm (0.16 in)
2
a
1
EAS30222
INSTALLING THE RELAY ARM
1. Lubricate:
• Collars
• Oil seals
Recommended lubricant
Lithium-soap-based grease
2. Install:
• Bearings "1"
(to the relay arm)
• Oil seals "2"
(to the relay arm)
Installed depth "a"
4.5 mm (0.18 in)
Installed depth "b"
3.5 mm (0.14 in)
TIP
• When installing the oil seals "2" to the relay
arm, face the character stamp of the oil seals
outside.
4-96
New