Yamaha MTN1000 2016 Service Manual page 111

1. Brake hose (front brake master cylinder to
hydraulic unit)
2. Clamp
3. Brake hose (hydraulic unit to front brake cali-
pers)
4. Front wheel sensor lead
5. Front brake hose holder
6. Front brake caliper
7. Front fork
8. Front brake hose bracket
9. Front wheel sensor lead holder
10.Front wheel sensor
A. To front brake master cylinder
B. Install the clamp with the opening facing
upward.
C. Route the front wheel sensor lead along the
brake hose (left) without any slack.
D. Make sure that the metal fitting of the brake
hose contacts the stopper of the brake cali-
per.
E. Fasten the front wheel sensor lead at the
white tape with the holder.
F. Fasten the front wheel sensor lead and paint
mark on the front brake hose with the clamp.
Route the front wheel sensor lead behind the
brake hose.
2-66
CABLE ROUTING