Edit A Concatenation Of Barcodes - CipherLab 2560 User Manual

2560 Series Barcode Scanner

5.6.1 EDIT A CONCATENATION OF BARCODES

1) Read the barcode above to start editing a concatenation of barcodes.
2) Code Type setting – read the
Type of the (first) barcode. For example, read "4" and "1" for Code 39.
Code Type Symbology
40 (@) ISBT 128
41 (A) Code 39
42 (B) Italian Pharmacode
43 (C) French Pharmacode
44 (D) Industrial 25
45 (E) Interleaved 25
46 (F) Matrix 25
47 (G) Codabar (NW7)
48 (H) Code 93
49 (I) Code 128
4A (J) UPC-E0 / UPC-E1
4B (K) UPC-E with Addon 2
4C (L) UPC-E with Addon 5
4D (M) EAN-8
4E (N) EAN-8 with Addon 2
3) Barcode Length setting – read the
4-digit length of the (first) barcode. For example, read "0065" for barcode length of
65 characters or read "0000" for any length.
Note: If not reading 0000 for any length, the 4-digit length must exclude prefix, suffix
(0x0d by default), length code, etc.
4) Matching Character setting – read the
st
the 1 character that must be found matching in the (first) barcode. For example,
read "4" and "1" for matching character "A" as the first character in the barcode or
read "00" for any character.
5) Read twice the "F" barcode on page 228 ("FF") to complete the setting of each
barcode.
6) Read the "Validate" barcode to end the editing of the barcode set.
178
User Guide
Edit Output Sequence
"Hexadecimal
"Decimal
"Hexadecimal
Value" barcode on page 228 for Code
Code Type Symbology
4F (O) EAN-8 with Addon 5
50 (P) EAN-13
51 (Q) EAN-13 with Addon 2
52 (R) EAN-13 with Addon 5
53 (S) MSI
54 (T) Plessey
55 (U) GS1-128 (EAN-128)
56 (V) UPC-A
57 (W) UPC-A with Addon 2
58 (X) UPC-A with Addon 5
5A (Z) Telepen
5B ( [ ) GS1 DataBar (RSS)
Value" barcode on page 227 for the
Value" barcode on page 228 for
Enter Setup