Programming Examples; Example I; Configure Form At - Define Transm Ission Sequence 244 6.6 Program M Ing Exam Ples - CipherLab 1662 User Manual

1662/1664 Barcode Scanner

6.6 PROGRAMMING EXAMPLES

6.6.1 EXAMPLE I

Extract data from the 10th character to the 19th character...
The edit ing form at should be configured as follows:
1) Read t he " Ent er Set up" barcode t o ent er t he Configurat ion Mode.
2) Read t he " Configure Form at 1" barcode.
3) Read t he " Clear All" and " Code 128" barcodes for applicable code t ype.
4) Read t he " Three Fields" barcode.
5) Read t he " Divide Field 1 by Lengt h" barcode, and set lengt h t o 9.
Field 1 dat a st art s from t he 1
6) Read t he " Divide Field 2 by Lengt h" barcode, and set lengt h t o 10.
Field 2 dat a st art s from t he 10
7) Read t he " St art ( Program m ing) " barcode t o program t he t ransm ission sequence.
8) Read t he " Field 2" barcode.
9) Read t he " End" barcode t o com plet e t he t ransm ission sequence set t ing.
10) Read t he " End Program m ing Form at " barcode t o com plet e t he set t ing of Edit ing Form at 1.
11) Read t he " Enable Form at 1" barcode t o apply Edit ing Form at 1 t o Code 128.
12) Read t he " Updat e" barcode t o exit t he Configurat ion Mode.
246
User Guide
st
charact er t o t he 9
t h
charact er t o t he 19
End Programming Format
t h
charact er.
t h
charact er.