Defining Output Format; Letter Case - CipherLab 1560 User Manual

DEFINING OUTPUT FORMAT

You may configure in which format the collected data will be output to the host computer.
Barcode read by the scanner will be processed in the following sequence -
1) Perform character substitution on the data scanned.
2) Add Code ID and
3) Process the whole data in step 2 with user formats. Data is now divided into fields by
user specified rules. Refer to
4) Add Prefix Code
Data][Suffix Code]
IN THIS CHAPTER
5.1 Letter Case ..............................................................129
5.2 Character Substitution ...............................................130
5.3 Prefix/Suffix Code .....................................................136
5.4 Code ID...................................................................137
5.5 Length Code ............................................................141
5.6 Multi-Barcode Editor..................................................144
5.7 Removal of Special Character .....................................147

5.1 LETTER CASE

By default, the alphabets transmission is case-sensitive, meaning that the alphabets will
be transmitted according to their original case. Ignoring the original letter case, select
[Upper Case] to output data in upper case only; otherwise, select [Lower Case] to output
data in lower case only.
*Normal
Lower Case
Length Code to the front of the data:
Chapter 6 Applying Formats for Data
and Suffix Code
[Code ID][Length Code][Data]
before transmission:
Update
Chapter 5
Editing.
[Prefix Code][Processed
Upper Case
129