Hid Character Transmit Mode; Keypad Support For Iphone/Ipad - CipherLab 1664 User Manual

2.1.6 HID CHARACTER TRANSMIT MODE

By default, HID interface sends data to the host in batch. You may read the "By
Character" barcode to process data one character at a time.
Note: "By Character" transmit mode is required when working with iPhone or iPad.

2.1.7 KEYPAD SUPPORT FOR IPHONE/IPAD

When the scanner has been successfully connected to iPhone or iPad for data collection,
the onscreen keypad of iPhone or iPad will disappear. Read the "Use POWER Key to Show
or Hide Keypad" barcode in advance. Then, it will allow pressing the [Power/Delete] key
to show or hide the onscreen keypad.
In addition to using the [Power/Delete] key, you may also show or hide the keypay by
reading the following barcode.
Note: This function only works for
(1) iPhone 4 and 3GS version 4.1 or later, and (2) iPad version 4.2 or later.
Chapter 2
*Batch Processing
By Character
*Normal
Use POWER Key to
Show or Hide Keypad
Show or Hide Keypad
Update
Selecting Output Interface
63