Table of Contents
Advertisement
ABB i-bus KNX
3.2.4.2
Parameter window
Automatic operation
© 2010 ABB STOTZ-KONTAKT GmbH
Commissioning
This parameter window is visible if in parameter window Fan the option yes
has been selected in the Enable automatic operation.
In this parameter window the threshold values for switchover of the fan
speed are defined. Furthermore, the limitations can also be enabled.
Important
The Fan Coil Actuator evaluates the threshold values in ascending order,
i.e. first of all the threshold value for OFF <-> Fan speed 1 is checked
followed by Fan speed 1 <-> Fan speed 2 etc.
The correct method of function is only assured if the threshold value for
OFF <-> Fan speed 1 is less than the threshold value Fan speed 1 <->
Fan speed 2 and this is less than Fan speed 2 <-> Fan speed 3, etc.
Object value "Automatic On/Off"
switch on to the automatic
Options:
1
0
This parameter defines how to react to a telegram.
1: Automatic is activated by a telegram with value 1.
0: Automatic is activated by a telegram with value 0.
46
Advertisement
Table of Contents
