Table of Contents
Advertisement
ABB i-bus KNX
3.2.5
Parameter window
Two-level fan
© 2010 ABB STOTZ-KONTAKT GmbH
Commissioning
In this parameter window, all settings for the Two-level fan are undertaken.
If a fan with two fan speeds is to be controlled via the FCA/S 1.1M, the
following parameters must be set:
In the Fan parameter window the option multi-level must be selected for
the Fan type parameter.
The parameter Speed on 2 limit must be selected with yes.
Now a two speed fan is controlled via fan speeds 1 and 2.
Fan speed 3 with all its parameters and options is now non-functional.
Note
Further parameters and their setting possibilities are described in
parameter window
multi-level
fan, page 35.
54
Advertisement
Table of Contents
