Table of Contents
Advertisement
ABB i-bus KNX
3.2.6.2
Parameter window
- Automatic operation
© 2010 ABB STOTZ-KONTAKT GmbH
Commissioning
This parameter window is visible if in parameter window Fan the option yes
has been selected in the Enable automatic operation parameter.
In this parameter window, the threshold values for switchover of the fan
speed are defined. Furthermore, the limitations can also be enabled.
The corresponding valve control communication object receives the value 1
if a fan speed is set. If a fan speed is not set the communication object will
receive the value 0.
Object value "Automatic On/Off"
switch on to the automatic
Options:
1
0
This parameter defines how to react to a telegram.
1: Automatic is activated by a telegram with value 1.
0: Automatic is activated by a telegram with value 0.
Threshold value OFF -> ON
in % [1...100]
Options:
1...10...100
Here the threshold value at which switch on occurs is defined.
If the value in the control value communication object is greater than
or equal to the parameterised threshold value, it is switched on.
If the value is less, then it is switched off.
61
Advertisement
Table of Contents
