General; Use Of The Product Manual - ABB i-bus KNX FCA/S 1.1M Product Manual

ABB i-bus KNX
1

General

1.1 Use of the product
manual
© 2010 ABB STOTZ-KONTAKT GmbH
General
Ventilator convectors, also referred to blower convectors or Fan Coil units,
are used for distributed HEATING and COOLING applications. There are
installed in a room and powered via a central heating and cooling system.
The room temperature can be quickly adjusted to suit individual preferences
using this system.
The Fan Coil Actuator FCA/S 1.1M has two outputs for control of motor
power operated or thermal heating and cooling valves. Multi-level fans with
up to three fan speeds can be switched via floating contacts. Furthermore,
two binary inputs, e.g. for monitoring of a window contact and the dew point
are available.
The additional contact is used, for example, to control an electric heater.
This manual provides you with detailed technical information relating
to the Fan Coil Actuator, its installation and programming.
The application of the device is described using examples.
This manual is divided into the following sections:
Chapter 1
Chapter 2
Chapter 3
Chapter 4
Chapter A
General
Device technology
Commissioning
Planning and application
Appendix
5