ABB i-bus KNX FCA/S 1.1M Product Manual page 53

ABB i-bus KNX
© 2010 ABB STOTZ-KONTAKT GmbH
Commissioning
Fan speed with limitation 1
Fan speed with limitation 2
Fan speed with limitation 3
Fan speed with limitation 4
Options: 3, 2, 1, off
unchanged
OFF
1
1, OFF
2
2, 1
2, 1, OFF
3
3, 2
3, 2, 1
With this parameter you set the fan speed that is set with active limitation,
or the speed that is not exceeded or undershot.
3, 2, 1, OFF: everything is possible.
Unchanged: the state is retained.
OFF: Off.
1: limited to speed 1.*
1, OFF limited to speed 1 and off.
2: limited to speed 2.*
2, 1: limited to speed 2 and 1.
2, 1, OFF: limited to speed 2, 1 and off.
3: limited to speed 3.*
3, 2: limited to speed 3 and 2.
3, 2, 1: limited to speed 3, 2 and 1.
* The control value is ignored.
51