Table of Contents
Advertisement
ABB i-bus KNX
© 2010 ABB STOTZ-KONTAKT GmbH
Commissioning
Enable output
(switch contact 16 A/10 AX)
Options:
no
yes
yes: The output is activated. A further parameter window is provided
on the left half of the window.
Enable communication object
"Request status values" 1 bit
Options:
no
yes
yes: A 1 bit communication object Request status values is enabled.
Via this communication object all status messages can be requested
provided that they have been parameterised with the option after a change
or request.
With option yes the following parameters are visible:
Recall with object value
Options:
0
1
0 or 1
0: The status messages are sent with the value 0.
1: The status messages are sent with the value 1.
0 or 1: The status messages are sent with the value 0 or 1.
21
Advertisement
Table of Contents
