Parameter Window Manual Operation - ABB i-bus KNX Product Manual


ABB i-bus KNX
Start-up
3.2.2

Parameter window Manual operation

In this parameter window, all the settings for manual operation can be made. Manual operation and the
ETS parameters and communication objects are only available with the devices of type JRA/S x.y.5.1 and
JRA/S x.y.2.1.
Manual operation
Options:
This parameter defines if the switchover between the operating states manual operation and KNX
operation is enabled or disabled via the button

Enabled: With this selection, the outputs can be directly controlled using the manual buttons.

Disabled: With its selection, manual operation is disabled. The outputs can no longer be operated via
the manual buttons.

Disable/enable via object: The communication object Disable/enable manual operation appears.
Manual operation can be enabled or disabled via the bus with this communication object.
For further information see:
44 2CDC 506 051 D0204 | JRA/S
Enabled
Disabled
Disable/enable via object
Telegram value: 0 = button enabled
1 = button disabled
Manual operation, p. 28.
on the device.