Parameter Window Input A - ABB i-bus KNX FCA/S 1.1M Product Manual

ABB i-bus KNX
3.2.9 Parameter window
Input A
© 2010 ABB STOTZ-KONTAKT GmbH
Commissioning
In this parameter window all settings for the Input A are undertaken.
Distinction between long and short
operation
Options: no
yes
Using this parameter you decide if the input differentiates between short and
long operation.
yes: After opening/closing of the contact it must first of all be ascertained
if a short or long operation has occurred here. Only thereafter will a
possible reaction be triggered.
The following drawing shows the function in detail:
Without
distinction between
short/long
Input signal
Possible reaction to
the input signal
T is the time duration from where a long operation is detected.
L
With
distinction between
short/long
T
L
Possible reaction to
the input signal
79