Table of Contents
Advertisement
ABB i-bus KNX
4.4.2
Reset via bus
© 2010 ABB STOTZ-KONTAKT GmbH
Planning and application
What is an ETS Reset?
Generally and ETS Reset is defined as a reset of the device via the ETS.
The ETS Reset is initiated in the ETS3 under the menu point Commissioning
with the function Reset device.
This stops the user program and it is restarted.
Switch contact output
The object value Staircase lighting time receives its parameterised
value.
The object value Disable function time is 0, i.e., the function Time is not
blocked.
The object value Permanent ON is 0, i.e., Permanent ON is not active.
The switch contact output goes to the safely opened state.
Note
For all resets after delivery including the first download, the response will
comply with that of a reset via the bus.
A send and switch delay is not executed.
All states are reset.
147
Advertisement
Table of Contents
