Table of Contents
Advertisement
ABB i-bus KNX
3.2.11.1
Parameter window
- Time
© 2010 ABB STOTZ-KONTAKT GmbH
Commissioning
This parameter window is only visible if in parameter window Output
the option yes has been selected in the Enable function Time parameter.
Value object "Function time disable"
on bus voltage recovery
Options:
unchanged
1, i.e. Disable function Time
0, i.e. Enable function Time
unchanged: The function Time can continue unchanged.
1, i.e. Disable function Time: The function Time is disabled.
Note
They can only be enabled via the communication object Function time
disable.
0, i.e. Enable function Time: The function Time is enabled and active
after a bus failure.
Note
If the staircase light is disabled when the function Time is operational,
the light will stay ON until it is switched OFF manually.
90
Advertisement
Table of Contents
