Connecting Through Rs422 - Christie Mirage M Series User Manual
High resolution video/graphics three chip 1080p hd, sxga+, and wuxga projectors.
Hide thumbs
Also See for Mirage M Series:
- User manual (162 pages) ,
- Setup manual (72 pages) ,
- Instruction sheet (3 pages)
Table of Contents
Advertisement
1. Using the appropriate serial communication cables, connect the controlling source, such as a
personal computer to the RS232 IN connector.
2. Set the projector baud rate to match that of the computer. See
tion parameters
Connecting through RS422
To control the projector with a computer or other controlling device with RS422 capability, connect
a RS422 serial communication cable between the controlling device and the RS422 port on the
projector. RS422 is better suited than RS232 for serial communication over distances greater than
fifty feet.
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
on page 51 for details on changing the baud rate.
Installation and Setup
Specifying serial communica-
38
Advertisement
Table of Contents
