Aligning Stacked Projectors - Christie Mirage M Series User Manual
High resolution video/graphics three chip 1080p hd, sxga+, and wuxga projectors.
Hide thumbs
Also See for Mirage M Series:
- User manual (162 pages) ,
- Setup manual (72 pages) ,
- Instruction sheet (3 pages)
Table of Contents
Advertisement
The steel ball on the end of the pin keeps the pin from releasing inadvertently
3. When required, repeat steps 1 and 2 for the additional projectors in the stack.
Aligning stacked projectors
Stacked projectors must be correctly aligned to one another so the resulting display is optimized. If
hoisting the stack, do so first and then align.
1. Prior to aligning the image, turn the locking nut to unlock then use the knob to adjust the
image.
2. To align the image, use pitch, yaw, or roll.
Pitch: Move the image up and down.
Roll: Rotates the image clockwise and counter-clockwise.
Yaw: Moves the image left and right.
If the projector is parallel to the screen, some keystone is introduced with Pitch and Yaw
adjustment.
3. Ensure to lock the locking nut to maintain the image adjustment.
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Installation and Setup
.
30
Advertisement
Table of Contents
