Aligning Boresight - Christie Mirage M Series User Manual
High resolution video/graphics three chip 1080p hd, sxga+, and wuxga projectors.
Hide thumbs
Also See for Mirage M Series:
- User manual (162 pages) ,
- Setup manual (72 pages) ,
- Instruction sheet (3 pages)
Table of Contents
Advertisement
Folded optics
In rear screen applications where space behind the projector is limited, a mirror may be used to
fold the optical path. The position of the projector and mirror must be accurately set. If considering
this type of installation call your dealer for assistance.
Aligning boresight
1. Display the boresight test pattern.
a. Pressing Test on the remote keypad or use the built-in keypad and press the soft key
that displays Test on the LCD display.
b. Press the Up Arrow key to cycle to Boresight.
c. Press Enter.
2. Focus the image on cross-hair image I.
3. Evaluate the focus on cross-hair image II and III.
If all three images are in focus, no further action is required.
If boresight is required, continue to step 3.
The adjustment screws on the lens mount affect the corresponding cross-hairs on the test
pattern. The cap screw (B) may be under a plastic cap. Remove and retain before adjusting.
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Installation and Setup
34
Advertisement
Table of Contents
