Technical Support; Connection And Use; Connecting To A Computer Or Server - Christie Mirage SST Technical Reference

Technical support

Technical support for Christie Enterprise products is available at:
• North and South America: +1-800-221-8025 or Support.Americas@christiedigital.com
• Europe, Middle East, and Africa: +44 (0) 1189 778111 or Support.EMEA@christiedigital.com
• Asia Pacific (support.apac@christiedigital.com)
• Australia: +61 (0)7 3624 4888 or tech-Australia@christiedigital.com
• China: +86 10 6561 0240 or tech-supportChina@christiedigital.com
• India: +91 (80) 6708 9999 or tech-India@christiedigital.com
• Japan: 81-3-3599-7481
• Singapore: +65 6877-8737 or tech-Singapore@christiedigital.com
• South Korea: +82 2 702 1601 or tech-Korea@christiedigital.com
• Christie Professional Services: +1-800-550-3061 or NOC@christiedigital.com

Connection and use

Once you have connected your computer to either the RS232 IN port (depending on which standard is
supported by your computer) or to the Ethernet port on Mirage SST, you can remotely access controls
and image setups, issue commands or queries, and receive replies.
Use these bidirectional messages to:
• Control multiple projectors
• Obtain a projector's status report
• Diagnose performance problems
Refer to the User Manual provided with the projector for all cable requirements and other connection
details.
Some commands are operational only when projector is powered up.

Connecting to a computer or server

Communicate with a remote computer, server, or an existing network using a RJ-45 cable.
The RS232 port located on the IMXB faceplate uses Christie-proprietary protocol and is intended for
Christie accessories or automation controllers only.
1. Use an RJ-45 cable to connect the Ethernet hub or switch to the Ethernet port, located on the
projector IMXB faceplate.
2. When using the Christie serial protocol over Ethernet, connect to port 3002.
3. For applications or equipment using serial communications, use the Christie-proprietary serial
protocol to communicate with the RS232 port on the IMXB faceplate.
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Communicating with Mirage SST
7