Christie Mirage M Series User Manual page 87
High resolution video/graphics three chip 1080p hd, sxga+, and wuxga projectors.
Hide thumbs
Also See for Mirage M Series:
- User manual (162 pages) ,
- Setup manual (72 pages) ,
- Instruction sheet (3 pages)
Table of Contents
Advertisement
•
Select Default for most sources (factory default). The image is centered and displayed as large
as possible depending on the type of source.
•
No resizing displays the image in its native resolution, which may or may not match the
projector's resolution. For example, for a source with a native resolution of 800 x 600, No
Resizing in an SXGA+ projector uses the central 800 x 600 pixels and have a black border. The
black border areas are unused areas, see below.
•
Full size uses all pixels for displaying the image, regardless of source or original aspect ratio.
Incoming source material having a different aspect ratio than the projector is stretched for
display.
•
Full width fills the display from left-to-right without changing the original aspect ratio of the
image. Depending on the source, data at the top and bottom may be discarded (cropped), or
the display may have black borders at the top and bottom (called letter boxed).
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Adjusting the image
87
Advertisement
Table of Contents
