Christie Mirage M Series User Manual page 109

Operators can select from the following trap events to receive up to three SNMP traps and three
email notifications when they occur:
Event Message (email
notification)
Lamp end of life Lamp has reached
end of life
Lamp end of life Lamp end of life
cleared cleared
Lamp fault Lamp fault has
occurred
Lamp fault cleared Lamp fault has been
cleared
Fan stall Fan stalled
Fan no longer stalled Fan stall cleared
Thermal sensor Thermal sensor
warning warning
Thermal sensor error Thermal sensor error
Thermal sensor OK Thermal sensor OK
Projector powered on Projector turned on
(Standby to Lamps (lamps on)
On)
Projector powered Projector turned off
off (Lamps On to (lamps off)
Standby)
No video input signal No video input signal
Video input signal Video input signal
detected detected
Lamp door open Lamp door has been
opened
Lamp door closed Lamp door has been
closed
Email notification
When a trap occurs while Email Notification is selected for the event, an individual email is sent to
each user defined email recipient. The SNMP menu allows up to three email address (up to 64
characters in length) to request notifications from the system during a trap event.
The resulting email is in the following format:
From: <from@email.com>
To: <to@email.com>
Subject: Christie Mirage M Series Projector SNMP Notification
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Parameters Trap config.
menu text
Lamp Number Lamp Life
Lamp Hours Elapsed
Lamp Number
Lamp Number Lamp Fault
Lamp Fault
Description
Lamp Number
Fan Name Fan Stall
Thermal Sensor Thermal Sensors
Name
Thermal Sensor Text
None Power
Frequency Signal Lost/Detected
Lamp Number Lamp Door
Monitoring and Maintenance
Default
notification
setting
SNMP Trap + Email
Disabled
109