Connecting To Power - Christie CP4415-RGB Gen2 Installation And Setup Manual

Table of Contents

Advertisement

This hardware is not provided in the kit. Use hardware appropriate for the material you are
securing the rack stand to.

Connecting to power

The recommended setup is to provide a hard-wired connection to AC power. When connecting the
projector to AC power, follow all electrical codes for your location.
This product is suitable for connection to an IT power distribution system.
Warning! If not avoided, the following could result in death or serious injury.
Always connect the ground or earth first to reduce shock hazard.
FIRE HAZARD! Do not use a power cord, harness, or cable that appears damaged.
FIRE AND SHOCK HAZARD! Do not attempt operation unless the power cord, power socket, and
power plug meet the appropriate local rating standards.
SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and current, as specified on the license label.
SHOCK HAZARD! A dedicated, protected ground or earth wire must be installed on the product
by Christie qualified technicians or electricians before it can be connected to power.
A certified electrician must be present during installation to make sure the installation meets the
local electrical code.
Caution! If not avoided, the following could result in minor or moderate injury.
Use an appropriately sized strain relief connector with the knockout plate provided, to make sure
adequate environmental sealing and to prevent the AC supply cable from accidentally being torn
out or rubbing against the knockout plate.
A 30 A maximum rated, certified wall circuit breaker is required. It must be part of the building
and easily accessible.
Use a minimum of 12 AWG copper wire, grounding included, for the connection of the main AC
supply to the projector's ground lug.
Either copper or aluminum is acceptable as conductor wiring material to the terminal block.
CP4415-RGB and CP4420-RGB Gen2 Installation and Setup Guide
020-103773-01 Rev. 1 (02-2023)
Copyright
©
2023 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Installing and setting up
22

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cp4420-rgb gen2

Table of Contents