Connecting The 3D Stereo Sync Cable - Christie Mirage M Series User Manual

• Frame locked passive sources are also compatible with the projector with the appropriate
primary and secondary input card.

Connecting the 3D stereo sync cable

This GPIO cable provides the means for synchronizing the various components in your 3D system.
Your source, projector display output, and emitters or 3D passive filter system can then operate
together with precision to minimize cross-talk and color artifacts. Connect as shown below.
For Easy Rider models, inputs A and B are not required, but recommended to ensure that stereo is
configured correctly, especially for multiple projector setups.
Connecting Two Stereo 3D Sync Inputs (recommended for multiple sources). Connect your video
card's stereo 3D sync cable to either Input A or either Input B on the 3D Stereo Sync Cable. These
inputs are provided to allow you to connect two different Stereo 3D sources and conveniently switch
the display back-and-forth between them.
Connecting One Stereo 3D Sync Output Connect the 3D Stereo Sync Cable output to your stereo 3D
sync emitter or 3D passive filter system, PZE device. The L/R switching of the device can then be
synchronized according to the controlling signal of choice—either the source input signal or the
internally generated signal—as set in the 3D Settings menu.
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Operating the projector
76