Christie Mirage M Series User Manual page 72

The values shown in one (any) of the displays. Use the Copy From function to copy them
into a User gamut in one projector.
Color Adjustments by X,Y
1. Select Color Adjustment
2. Color Temperature
3. Red X
4. Red Y
5.
Green X
6. Green Y
7.
Blue X
8. Blue Y
9. White X
10. White Y
11. Yellow Notch Filter
12. Auto Color Enable
13. Color Enable
14. Copy From
4. In each projector, select a User color adjustment (1-4) to enable Color Adjustments by X,Y
changes. Then enter your recorded x/y values into each menu.
Color Adjustments by X,Y
1. User 2
Select Color Adjustment
2. 6521
Color Temperature
3. Red X 0.655
4. Red Y 0.341
5. Green X 0.332
6. Green Y 0.575
7. Blue X 0.144
8. Blue Y 0.093
9. White X 0.320
10. White Y 0.330
11. Yellow Notch Filter
12. Auto Color Enable
13. Color Enable Red
14. Copy From Max Drives
5. In each projector, judge by eye and adjust x/y coordinates slightly in the following manner:
• To match reds, decrease Red X until full field red screens match.
• To match greens, decrease Green Y until full field green screens match.
• To match blues, increase both Blue X and Blue Y until full field blue screens match. For
speed, select the Auto Color Enable checkbox. Each color coordinate you select
automatically triggers a full field display of the corresponding color.
Alternatively, use the Color Saturation menu for these adjustments or to fine tune.
These coordinate adjustments move the three color points closer together (see below) to
establish a shared gamut attainable by all projectors in your group. Adjust only as necessary to
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Color Adjustments by X,Y
Max Drives 1. Select Color Adjustment
6521 2. Color Temperature
0.655 3. Red X
0.341 4. Red Y
0.332 5.
Green X
0.575 6. Green Y
0.144 7.
Blue X
0.093 8. Blue Y
0.320 9. White X
0.330 10. White Y
11. Yellow Notch Filter
12. Auto Color Enable
Red 13. Color Enable
Max Drives 14. Copy From
Color Adjustments by X,Y
1.
Select Color Adjustment
2.
Color Temperature
3. Red X
4. Red Y
5. Green X
6. Green Y
7. Blue X
8. Blue Y
9. White X
10. White Y
11. Yellow Notch Filter
12. Auto Color Enable
13. Color Enable
14. Copy From
Operating the projector
Color Adjustments by X,Y
Max Drives 1. Select Color Adjustment
6521 2. Color Temperature
0.640 3. Red X
0.350 4. Red Y
0.329 5.
Green X
0.560 6. Green Y
0.129 7.
Blue X
0.100 8. Blue Y
0.374 9. White X
0.367 10. White Y
11. Yellow Notch Filter
12. Auto Color Enable
Red 13. Color Enable
Max Drives 14. Copy From
Color Adjustments by X,Y
User 2 1.
Select Color Adjustment
6521 2.
Color Temperature
0.640 3. Red X
0.350 4. Red Y
0.329 5. Green X
0.560 6. Green Y
0.129 7. Blue X
0.100 8. Blue Y
0.374 9. White X
0.367 10. White Y
11. Yellow Notch Filter
12. Auto Color Enable
Red 13. Color Enable
Max Drives 14. Copy From
Max Drives
6521
0.626
0.350
0.331
0.528
0.133
0.106
0.323
0.359
Red
Max Drives
User 2
6521
0.626
0.350
0.331
0.528
0.133
0.106
0.323
0.359
Red
Max Drives
72