Cleaning Or Installing The Filter; Connecting To Ac Power - Christie Inspire 4K Series Installation And Setup Manual

Cleaning or installing the filter

For dusty environments, Christie recommends purchasing the optional accessory dust filter
(P/N: 140-148104-XX).
Regularly clean or replace the filters in the projector to ensure dust and other foreign materials are
kept out of the projector.
1. Turn off the projector.
2. Remove the filter cover.
3. Remove the filter from its compartment.
4. Clean or replace the filter.
In environments where dust, dirt, and other contaminants are higher than normal, Christie
recommends replacing the air filter more frequently than 500 hours as specified in the current
maintenance schedule.

Connecting to AC power

To operate the projector at full brightness, make sure the power supply meets the power requirements
for Inspire Series projectors. For more information, refer to Power connection on page 12.
Model name Parameter
4K860-iS Power rating
4K860A-iS
Power consumption
Inspire Series Installation and Setup Guide
020-002097-01 Rev. 1 (11-2023)
Copyright ©2023 Christie Digital Systems USA Inc. All rights reserved.
If printed, please recycle this document after use.
Interference between two
projectors.
Power requirements
100 to 240 VAC, 50/60 Hz, 6.5A
650 W maximum
Installation and setup
22