Christie Mirage M Series User Manual page 24

HD 1080p Vertical Offset Ranges
HD 1080p lens description
Lens ILS 0.73:1SX+/0.67:1HD
Lens ILS 1.25-1.6SX+/1.16-1.49HD
ALL OTHER LENSES
SXGA+ Vertical Offset Ranges
SXGA+ lens description
Lens ILS 0.73:1SX+/0.67:1HD
Lens ILS 1.25-1.6SX+/1.16-1.49HD
ALL OTHER LENSES
Notice. Failure to comply with the following may result in property damage.
• Offsets are subject to ±7% centering tolerance.
• % Offset = number of pixels of offset/half vertical panel resolution x 100.
The horizontal position of the image can also be offset (that is moved to the left or right of optical
center) by adjusting the motorized lens mount. The amount of horizontal offset available depends
on the lens installed and if the image has already been vertically offset. Horizontal offset can be
expressed as the percent of half the image width or the number of pixels of shift to one side of lens
center.
• Offsets are subject to ±7% centering tolerance.
• % Offset = number of pixels of offset/half horizontal panel resolution x 100.
WUXGA Horizontal Offset Ranges
WUXGA lens description
Lens ILS 0.73SX+/0.67HD
Lens ILS 1.25-1.6SX+/1.16-1.49HD
ALL OTHER LENSES
HD 1080p Horizontal Offset Ranges
HD 1080P lens description
Lens ILS 0.73:1SX+/0.67:1HD
Lens ILS 1.25-1.6SX+/1.16-1.49HD
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Lens part Minimum offset
number
above or below lens center
118-100110-XX ±35%
118-100111-XX ±102%
±119%
Lens part Minimum offset above or
number below lens centers
118-100110-XX ±23%
118-100111-XX ±73%
±100%
Lens part Minimum offset
number above or below lens center
118-100110-XX ±6%
118-100111-XX ±38%
±54%
Lens part Minimum offset above or
numbers below lens center
118-100110-XX ±12%
118-100111-XX ±40%
Installation and Setup
±189 pixels
±551 pixels
±643 pixels
±121 pixels
±383 pixels
±525 pixels
±58 pixels
±365 pixels
±518 pixels
±115 pixels
±384 pixels
24