Adding A System Event; Adding A Gpio Event; Adding A Function Key Event; Led And Key States - Christie Mirage M Series User Manual

The added event appears in the RTE Listing window. To activate or deactivate one or more
RTEs, select or clear each check box in the Active column accordingly.

Adding a system event

1. Click Advanced > RTE.
2. To open the RTE wizard, click Add.
3. Select the System Event tab.
4. From the System Event list, select a type of event.

Adding a GPIO event

1. Click Advanced > RTE.
2. To open the RTE wizard, click Add.
3. Select the GPIO Event tab.
4. For the GPIO Event option define the Input Condition field as required.
The Input Condition field contains seven blocks which refer to the seven I/O pins on the GPIO
connector. Pin 1 = +12V and Pin 5 = Ground are not included or changed. Clicking a block
toggles between H, L, and X as shown. See
detailed information.

Adding a function key event

1. Click Advanced > RTE.
2. Click Add to open the RTE Wizard.
3. Select the Function Key Event tab.
4. Select a Function key from the list.

LED and key states

The LED color of the keys indicates that the key is in one of these states:
LED color Status
Amber A functionality is available that affects the displayed image of the projector.
Blue A functionality is available that is relevant to the built-in LCD only and will not affect the displayed
image from the projector.
Off The key is disabled in the current context.
Power key Used to switch from Standby mode to ON, and from ON to Standby mode; LED always remains
Amber
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Monitoring and Maintenance
Connecting to the GPIO connector on page 42 for
111