Christie Mirage M Series User Manual page 141

Channel Group Name
13 Input Channel
14 Input Input
15 Image Image Freeze
16 Lamps/ Power
Power
17 Reserved
18 Reserved
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
Description
Projector channel selection
0 to 9 = Projector channel 1
10 to 19 = Projector channel 2
20 to 29 = Projector channel 3
....
180 to 189 = Projector channel 19
190 to 199 = Projector channel 20
255 = Default
Input selection
0 to 9 = Slot 1, input 1
10 to 19 = Slot 1, input 2
....
50 to 59 = Slot 1, input 6
60 to 69 = Slot 2, input 1
....
110 to 119 = Slot 2, input 6
120 to 129 = Slot 3, input 1
....
170 to 179 = Slot 3, input 6
180 to 189 = Slot 4, input 1
....
230 to 239 = Slot 4, input 6
255 = Default
0 to 85 = Unfreeze image
172 to 255 = Freeze image
0 = Default
0 to 85 = Power off (Switch lamps off,
cool lamps down and go to Standby
mode)
172 to 255 = Power on (Switch lamps
on, warm up mode)
128 = Default
Reserved for future expansion
Reserved for future expansion
Appendix: DMX/ArtNET
Notes
Does not change input on
default.
A five second timer is used
before executing a power
state change. If the slider
moves out of the on/off
range within the five
seconds, the timer is
cancelled.
Does not change power
state on default.
No Reset
No Reset
141