Installation And Setup; About The Projector - Christie Mirage M Series User Manual

Installation and Setup

This section explains how to install, connect, and optimize the projector for delivery of superior
image quality.
Danger! Failure to comply with the following results in death or serious injury.
• Always power down the projector and disconnect all power sources before servicing or cleaning.

About the projector

A
H
Built-in keypad
A
Lamp doors
B
Top cover
C
LED status indicators
D
Mirage M Series User Manual
020-101942-02 Rev. 1 (10-2018)
http://www.pureglare.com.au
B
C
The built-in keypad is located on the side of the projector. Use it similarly to the
IR remote to control the projector. An LCD display is located above the keypad
for displaying projector status.
The lamp doors are located at the side of the projector, which provides easy
access to the lamp module for replacement. The lamp doors are fitted with
safety interlocks which switch the lamp off when the door is opened. The lamp
doors are provided with clear windows to indicate when the lamps are on.
—
See LED and key states on page 111.
D
E
F
G
I
H
16